Free Shipping in the Continental United States
We cannot ship to Alaska, Hawaii, or any international destinations at this time with the exception of Canada.
Disclaimer for Canadian Orders: Duties, taxes and brokerage are not included, customer is responsible for all brokering costs. A name and fax/email of the broker is required before the product ships.
Woodfold Series H4100 Acoustic Accordion Doors
Product: Woodfold Series H4100 Acoustic Accordion Doors
Brand: Woodfold
Brand: Woodfold
The H4100 acoustic accordion partitions consist of two continuous laminated vinyl covers assembled to steel pantographs supported by aluminum covered steel channel posts at each end with an STC 41*. This series also incorporates steel strips laminated within each fold for enhanced acoustical performance. These acoustic partitions are easy to operate, durable and come in a wide variety of options and finishes. Acoustic Accordion Partitions are an ideal sight and sound barrier for interiors that require frequent flexibility in room division.
Woodfold’s continuous vinyl design accordion partitions are custom designed and manufactured to suit the specific needs of your space.
Two laminated covers with clean, crisp lines, multi-ply soft vinyl sweepstrip sound seals at the top and bottom of both sides. The laminated construction ensures the covers will not sag or bag over time.
Full height dual-magnetic closure strips in the jamb allow ease of closure and help to seal out sound.
Our accordion partitions provide years of smooth, easy folding action and allows the doors to easily maneuver. The laminated cover construction adds strength and stability to the door.
A selection of heavy duty aluminum track systems are available to accommodate various ceiling conditions. Three track system types for a wide range of installations.
Configure Your Door
Dimensions
36 – 480 in
48 – 145 in
$0.00
Specifications | Woodfold Series H4100 Acoustic Accordion Doors
- Covers have multi-ply sweep strips top and bottom both sides of the partition for an acoustical seal.
- Material: Steel and fiberboard inners with an acoustical lining, exterior: Commercial vinyl continuous curtain.
- The top sweep strips are 1/2 inch (13 mm).
- Partitions have an internal framing of 14 ga. (2 mm) half hard steel riveted to form “X” construction pantographs.
- Pantographs provide an even extension and contraction without binding on straight runs of track as shown on the plans.
- Partitions have pantographs located at top and bottom, plus intermediate pantographs located no more than 4 feet (1219 mm) on center for heights over 8 feet (2.438m). The bottom sweep strips are 1-1/2 inches (38 mm).
- The lead post is trimmed with clear anodized aluminum and includes mechanical latching.
- Wheels: Nylon-tired steel ball bearing wheels; 4 wheeled carriers on each lead post with intermediate carriers every 18″ on center and nylon-tired two wheeled carriers elsewhere as appropriate.
- Lead Posts: Extruded aluminum faces on full height steel channel.
- Handles: Aluminum with steel pull handles.
- Latch: : Latch with thumbturn one side/two sides and a range of keylock options available.
- Width: No max, 20ft sections require type B rolling post.
- Height: Up to 12’.
- Stack Width: Extended: 5-1/2″ – Closed 7-1/2″.
- Partition hanging weights: 4.3lb per sq ft.
Finish Options and Factory Default Configurations - Hardwood Veneers & Vinyl Laminate
PLEASE NOTE: The stain and color samples on this page have been color matched using a monitor calibrated to the sRGB IEC1966-2.1 color profile. Intended only as a guide for color selection, the actual finish materials will vary due to the natural and acceptable variations in wood grain characteristics, textures, and color tones, as well as the color variation that occurs among individual computer monitors.
*All panel samples show factory default color combinations, unless noted otherwise.
Woodfold has today’s most popular hardwood species to match your interiors. Woodfold insists on select grade veneers, laminated to an engineered core to ensure excellent dimensional stability. Clear finish is standard; however, custom-stained finish service is always available.
Birch
Oak
Cherry
Birch Factory Default Colors
Oak Factory Default Colors
Cherry Factory Default Colors
Mahogany
Maple
Walnut
Maple Factory Default Colors
Walnut Factory Default ColorsIncredibly realistic looking, Woodfold’s Vinyl-Lam woodgrain finishes provide a wide range of color selection representing several wood species. Woodfold’s Vinyl-Lam finishes are laminated to an engineered core to ensure excellent dimensional stability.
Maple
Cherry
Oak
Maple Factory Default Colors
Cherry Factory Default Colors
Oak Factory Default Colors
Walnut
Driftwood
Walnut Factory Default Colors
Driftwood Factory Default ColorsWoodfold’s solid color, multi-textured vinyl’s are selected to compliment the most popular current interior colorations. Woodfold’s Vinyl-Lam finishes are laminated to an engineered core for excellent dimensional stability.
White
Black
Gray
White Factory Default Colors
Black Factory Default Colors
Gray Factory Default Colors
Chalk
Chalk Factory Default ColorsCoordinating Hardware Hinge System
A clear (silver) finish is supplied with Off-White and Chalk. A bronze finish supplied with all others.Coordinating Vinyl Panel Connectors
We carefully color coordinates our vinyl panel connectors as a standard feature.
White
Sand
Gray
Brown
BlackHow to Measure for Accordion Doors
To assure correct sizing of your Woodfold accordion door the finished opening should be measured precisely from side to side for width and from the header surface where the track will be attached, to the finished floor or counter surface for height.
Width
Measure the width at the bottom, halfway up and at the top of the door and use the widest dimension you have.
Note: if the widest dimension is at the bottom or center you may have to trim the suspension track to fit your opening at the top of the door as track lengths are made to the ordering width. This can be done with a hacksaw.Height
Measure from the top of the finished floor to the point where you are going to attach the track.
NOTE: For those areas where the floor is uneven (e.g. concrete floors) please take 3 or 4 height measurements along the floor. Use the shortest measurement as the finished opening height except 2100, 3300 or 4100. For sound doors use tallest height.Dimensions should be stated width first and then height and should represent sizes after any and all modifications have been done to the opening. Unless customer specified, we will allow 9/16″ floor clearance for doors over 4′ high and 5/16″ for doors 4′ and less. Beware of variations in floor and/or ceiling surfaces.
Please check your measurements for accuracy. Contact us if you need additional assistance.
Downloads (specs and warranty info)
jQuery(document).ready(function($){
$('.quantity').remove();
});